Miele - PW5105 Commercial Washing Machine (10kg)

Miele - PW5105 Commercial Washing Machine (10kg)


Price: Price on application

Print Make an Enquiry


This Washing Machine Is Available To Purchase or Rent 

The Miele PW5105 Vario is part of the Miele Slimline range of products. This is a genuine 10kg / 100 litre commercial washing machine that will fit in a 700mm wide space and will also operate on a single phase 30amp electrical supply. This makes the PW5105 an extremely versatile and practical solution for many laundries.

The PW5105 still adheres to the Miele 'forever better' philosophy and build quality and efficiency has not been reduced to accommodate theses changes. Taking it's design from the Octoplus range this machine is suitable to a huge range of application's. The dump valve version is ideal for care homes, hospitals, veterinary surgeries and medical establishments with dedicated sluice and thermal disinfection programme's.

This washer compliments the Slimline PT8301 & PT8303 tumble dryers which can also be found in the tumble dryers section of the website.

Main Features: 
Load capacity 10kg
Profitronic L Vario controls; 16 programmes and 52 additional specialist programmes
Honeycomb drum, 100 l capacity
Spin speed 1100 rpm
Exceptional efficiency, lowest energy consumption figures per KG in this range
G factor 370, residual moisture 51%
Sluice & thermal disinfection programmes on DUMP VALVE machine only.
H/W/D (mm) 1020 x 700 x 827
YOUR NEXT STEP..............
As with all commercial appliances we recommend a free site evaluation to ensure you have the correct machine for your needs and to ensure your services such as water, electrics and drainage are correct. However a good starting point would be to give our team a quick call and we can run through the machines suitability for your requirements and services.
Call Our Team Now on 0330 3335070




Installation Information:

  • Capacity (Kg/lb):10/22
  • Dimensions (H / W/ D in mm):1020 / 700 / 827
  • Drum Volume (Litres): 100


Pump Drain Model = Stand-pipe - minimum 1 1/2 inch diameter.

Gravity Drain Model (sluice) = 2 inch drainage connection at ground level or below the height of a plinth where a plinth is being installed.


Options: Single Phase 32A or Three Phase & Neutral (3 x 16A)

Water Supply

Hot & Cold (or cold only) with 3/4 bsp connectors (Minimum 1bar pressure)



If you cannot view the PDFs, please click the link below.